Regul R200 Starter Pack
859,00 €
excl. 16% VAT plus Shipping Costs
Regul R200 Starter Pack with a set of commonly used I/O modules (analog input, digital input, digital output), 512 Mb RAM, 1 Gb Flash memory, SD card slot.
Modbus TCP/RTU, OPC UA/DA, IEC 101 protocols are included into the package.
Programmable with the free Epsilon LD software.
The package consists of:
| R200 CU 00 041 | CPU module, ARM Cortex Ax, 512 Mb RAM, RS232, RS485, 2 x Ethernet RJ-45, GPS/GLONASS, with 24 VDC power supply module, 15 W (with support of remote racks via star or ring connection) | 1 |
| R200 AI 04 011 | Analog Input (AI) module, 0/4…20 mA, 4 channels, common galvanic isolation, accuracy 0.1 % | 1 |
| R200 DI 08 011 | Digital Input (DI) module, 24 VDC, 8 channels, common galvanic isolation | 1 |
| R200 DO 08 011 | Digital Output (DO) module, 24 VDC, 0.5 A, 8 channels, common galvanic isolation | 1 |
| RAM capacity | |
|---|---|
| ROM capacity | |
| Operating temperature | |
| Approvals |
Data sheets
Regul R200 PLC. Datasheets
Manuals
Regul R200 System Manual (DPA-319, v2.17,English)
Regul R200 Systemhandbuch (DPA-319, v2.17, Deutsch)
Epsilon LD User Manual (v2.7, English)
Redundancy Manual (request at support@gp-systems.com)
HART Manual
IEC 101/104 Manual (v2.0, English)
OPC DA Server User Manual (v1.0.35, English)
OPC UA User Guide (v1.2, English)
Modbus User Guide (v1.5.5, English)
Print User Guide (v1.1, English)
Virtual Regul PLC User Guide (v1.1, English)
SFP Modules Compatibility with Regul Controllers
Software
Epsilon LD [v1.6.4, build 18301] - programming and configuration software for Regul RX00 controllers
OPC DA Server [v1.0.35] for Regul RX00 controllers
Reviews
There are no reviews yet.