Hardware-Redundant Hot-Swappable Controller

Regul R200 programmable logic controller (PLC) was developed for use in harsh industrial conditions and operates  in the temperatures from -40 to +60 °C   and electromagnetic interference . Each module passes a burn-in test, which is carried out at 50 °C for 48 hours.

User application runs in real time and inside a selected real-time operating system.

Any I/O module in the system could be replaced in hot-swap – without stopping the user application. During replacement, terminal block remains intact, reducing maintenance time. Extendability is up to 140 I/O modules per rack and up to 255 racks.

All CPU modules feature slot for SD card, 512 GB RAM, and 1 GB flash memory for archive and local data storage. Each CPU module comes with built-in support for OPC DA / OPC UA, Modbus RTU / Modbus TCP, IEC 60870-5-101 / 104.

There are versions of CPU modules with fiberoptic port, RS485, with GPS/Glonass receiver (and run internal time server adjusting to the satellite signal).

The choice of I/O modules includes digital and analog modules with common or channel galvanic isolation, high-accuracy analog input (0.025%), thermoresistances and thermocouples input.

Programming can be done in one of the five IEC 61131-3 languages ​​or in CFC. The Epsilon LD is a familiar programming environment for many and is available free of charge.

Regul R200 Programmable Logic Controller


Extremely fast

1 ms application cycle time, 1 ms scan time, 512 Mb RAM, 1 Gb Flash.

Hot-swappable I/O

All the I/O modules are hot-swappable to provide uninterrupted operation.

Free programming software

Epsilon LD configuration and programming software (Codesys-based) is provided free of charge.

Protocols included

Commonly used protocols, such as Modbus RTU/TCP, Ethernet, IEC 60870-5-101, OPC UA/DA are included into standard supply.

High-accuracy AI module

With 0.025% accuracy – often a requirement in fiscal metering applications.

Sealing hole

A special hole for sealing the modules when used in fiscal applications.

Support of IEC 61131-3 (all 5 languages)

Epsilon LD is an integrated software package that provides all the tools required for configuration, programming and maintenance of all the REGUL controllers. Having one package only enables you to flexibly use the most appropriate controller series in your project without having to learn new tools and approaches.


Remote Support

Our technical support is always ready to connect and help you remotely.

Contact us:
Phone: +49 561 820 93350
E-mail: support@gp-systems.com


The equipment in continuous operation is valuable only when the spares are available on short notice. Shipped to you from our warehouse in Kassel, Germany.


Improve the efficiency of your team, decrease downtime, or get familiar with our controllers. On-site trainings are available for you with live demo sets of the controllers.